CUMMINS 12V EXHAUST MANIFOLD 6BT

CUMMINS 12V EXHAUST MANIFOLD 6BT

How to install or removal manifold

Description

Removal:

Remove the heat shield mounting cap screws.

Remove the heat shield.

Remove the insulation blanket mounting cap screws.

Remove the insulation blanket.

Remove an upper capscrew and spacer from each end of the exhaust  manifold  and install guide studs, Part Number 3376488.

Remove the remaining capscrews, spacers, exhaust  manifold , and gaskets.

Discard the gaskets.

Installation:

Apply a film of high temperature anti-seize compound to new exhaust  manifold  capscrews.

Align the  manifold  and gaskets using guide studs.

Install spacers and new capscrews hand tight.

Remove guide studs and install remaining spacers and capscrews hand tight.

Tighten the capscrews in the sequence shown.

Torque Value:

1.       27  n•m [ 239 in-lb ]

2.       47 Nm 35 ft-lb

3.       Loosen all capscrews.

Tighten the capscrews in the sequence shown.

Torque Value:

1.       27  n•m [ 239 in-lb ]

2.       47 N•m 35 ft-lb

3.       Loosen all capscrews

4.       27   n•m [ 239  in-lb ]

5.       47 N•m 35 ft-lb.

Install the exhaust  manifold  insulation blanket.

Install the exhaust  manifold  heat shield.

Tighten the capscrews.

Torque Value:  47  n•m    [ 35 ft-lb ]